![MOLD DAMAGE in Florida](https://alconeroandassociates.com/wp-content/uploads/2021/03/210312.png)
Water damage is hard to clean up because water remnants can sink into the building, lingering for days if it is not dried immediately. The accumulated moisture can compromise the structural integrity of the property, which weakens the affected areas. One of the most troublesome situations of water accumulation is mold damage. Mold damage in Tampa is one of the biggest problems faced by homeowners at present. If you neglected the moisture and didn’t take any preventive measures immediately, you will have to deal with mold infestation.
How does mold damage occur?
To mitigate mold completely, you need to understand how it accumulated. Mold is a type of fungi that grows in damp and dark places. They are consequences of water damage and accumulation because excessive moisture can create an ideal ground for them to grow in and diffuse. The mold growth can happen within one to two days after the water damage took place. If the moisture lingers for a while already, you will surely see mold.
How to prevent mold growth?
There are various steps you can take immediately after the water damage to prevent mold growth. It is ideal to hire a professional to mitigate the mold damage because they have the right equipment to get the job done efficiently. Alconero and Associates—Public Adjusters in Miami provide you measures you need to take to prevent further mold damage and get the best results:
- Remove the accumulated water. The initial step is to remove all the accumulated water from the affected area. To do this efficiently, you can rent a specialized water vacuum to remove the waters. You can also use a bucket to clean the affected area. If the water is from roof damage or sewer backup, do not touch it without any protective gear. Contaminated water contains dangerous pathogens and chemicals that are harmful to your health. Water from burst and broken pipes is safe to clean without the use of special tools and equipment.
- Remove rugs and carpets into the affected area immediately. Remove rugs, carpets, and other potential materials where molds can potentially accumulate. They take a longer time to dry than other building materials. It is ideal to steam clean them to remove all germs and contaminants. You can also dry rugs and carpets under direct sunlight to reduce the chances of mold infestations. If you do not remove the rugs and carpets, mold will likely grow underneath them and diffuses to the surrounding areas.
- Dry the wet areas and surfaces. Once you remove the wet carpets and rugs, dry all the wet surfaces as much as you can. After which, you will work on preventing measures in mitigating mold damage. You can use a dry mop or rags to soak up the water that the vacuum couldn’t remove.
You can also rent industrial-sized fans to remove all excess moisture from the affected area. Make sure that the affected area will dry up quickly. Mold and mildews can develop within a day or two after moisture was accumulated in the right condition; hence, you need to mitigate the excess water remnants and moisture as quickly as possible to minimize the possibility of mold damage.
- Be aware of warning signs. After clearing and drying, continue to be sensitive to musty odors around the affected area where moisture was accumulated.
- Keep the surfaces and room free from moisture. To keep molds at bay, the humidity of the room should remain below 50%. You can use the dehumidifier to achieve a below 50% humidity. If the weather outside is warm and sunny, you can open all windows and air while the humidifier is functioning to ensure your room remains dry after all the excess water is removed. You need to maintain this dryness a few days after the water damage disaster to prevent possible mold damage.
- Sanitize all surfaces and affected areas. Once all the excess moisture is removed, you should clean and sanitize all surfaces and affected areas immediately. You can opt to purchase over-the-counter cleaning solutions that can potentially eliminate both bacteria and the possibility of molds and mildews. You can buy these cleaning solutions in your local store. You can also clean small pockets of infestation with bleach to get rid of mold accumulation.
If you follow the measures, you can likely prevent mold damage. Mold damage is dangerous to your health and the structural integrity of your property. Unfortunately, preventive measures do not always work; hence, if you still see signs of mold damage and growth, you should elicit help from professionals to clear it as soon as possible. Do-it-yourself mold clearing solutions are not very effective and can even cause health problems. A professional cleaning will eliminate mold from your property so you can breathe the indoor air without concern. You can file an insurance claim for mold damage in Tampa.
How a public adjuster helps you maximize your insurance claim?
For concerns regarding insurance claims for mold damage in Tampa, do not hesitate to seek help from Alconero and Associates Public Adjusters in Tampa. We are equipped with knowledge and expertise, and committed to serve and represent you to claim your insurance claim you deserve. We are glad to share our expertise to help you maximize your insurance claim.
We are the best Public Adjusters in Florida
Alconero te devuelve tu dinero